Mac os x startup sounds

The first generation of Power Macintosh computers also do not use the Reekes chime, instead using a chord strummed on a Yamaha string acoustic guitar by jazz guitarist Stanley Jordan.

How to Permanently Disable the Startup Sound

Further, the Power Macintosh — computers excluding the and , which have the "bong" chime like the one used for the PCI-based Power Macs use a unique chime, which was also used for the television commercials for the Power Macintosh and PowerBook series from until , and the 20th Anniversary Macintosh uses another unique sound. For models built prior to the introduction of the Power Macintosh in , a Sad Mac icon, an error code, and distinctive sounds, are displayed on failure of initial self-diagnostic tests.

This phenomenon is referred to as the "Chimes of Death". The chime for all Mac computers from is the same chime used first in the iMac G3. The chord is a F-sharp major chord, and was produced by pitch-shifting the AV's sound. The Mac startup chime is now a registered trademark in the United States, [8] and is featured in the film WALL-E when the titular robot character is fully recharged by solar panels as well as in the Brad Paisley song " Online ". As of [update] , Apple has removed the startup chime starting with the late MacBook Pro. A Happy Mac is the normal bootup startup icon of an Apple Macintosh computer running older versions of the Mac operating system.

Macintosh Startup Sounds

It was designed by Susan Kare in the s, drawing inspiration from the design of the Compact Macintosh series and from the Batman character Two-Face. The Happy Mac indicates that booting has successfully begun, whereas a Sad Mac along with the "Chimes of Death" melody or one or more beeps indicates a hardware problem. When a Macintosh boots into Mac OS 9 or lower, the system will play its startup chime, the screen will turn gray, and the Happy Mac icon will appear, followed by the Mac OS splash screen or the small "Welcome to Macintosh" screen in System 7.

Mac OS versions 8. On early Macs that had no internal hard drive , the computer boots up to a point where it needs to load the operating system from a floppy disk. Until the user inserts the correct disk, the Mac displays a floppy icon with a blinking question mark. In later Macs, a folder icon with a question mark that repeatedly changes to the Finder icon is shown if a System Folder or boot loader file cannot be found on the startup disk.

Macintosh startup - Wikipedia

With the introduction of Mac OS X , in addition to the blinking system folder icon, a prohibition icon was added to show an incorrect OS version found. The bomb screen was replaced with a kernel panic , which was originally colored white but was changed to black in version With Mac OS X This is also the last version that had a Happy Mac icon; in version A Sad Mac is a symbol used by older-generation Apple Macintosh computers hardware using the Old World ROM and not Open Firmware , which are those predating onboard USB , starting with the original K Macintosh and ending with the last NuBus -based Power Macintosh models including the first-generation , , , as well as the PowerBook and , [13] to indicate a severe hardware or software problem that prevented startup from occurring successfully.

The Sad Mac icon is displayed, along with a set of hexadecimal codes that indicate the type of problem at startup. Different codes are for different errors. This is used in place of the normal Happy Mac icon, which indicates that the startup-time hardware tests were successful. PowerPC Macs play a sound effect of a car crash, and computers equipped with the PowerPC upgrade card use the three note brass fanfare death chime A, E-natural, and E-flat same as the Macintosh Performa and Macintosh Performa A Sad Mac may be deliberately generated at startup by pressing the interrupt switch on Macintosh computers that had one installed, or by pressing Command and Power keys shortly after the startup chime.

On some Macintoshes such as PowerBook c, if the user presses the command and power keys before the boot screen displays, it will play the "chimes of death". The chimes are a fraction of normal speed and there is no Sad Mac displayed. Mac OS X On the iPod , if damage or an error occurs in the hardware or the firmware , for example, if its files are deleted, a Sad iPod appears.

This is similar to the Sad Mac, but instead of a Macintosh, there is an iPod, and there are no chimes of death. The icon also lacks a nose, and the frown is flipped horizontally. It also does not show hexadecimal codes indicating what problem occurred in the iPod. This error screen will not show up when a problem occurs in the newer iPods. Different Macintosh series used different death chimes. The Macintosh II was the first to use the death chimes a loud and eerie upward major arpeggio , with different chimes on many models.

The Macintosh Quadra , Centris , Performa , LC and the Macintosh Classic played a generally softer and lower pitched version of the upward major arpeggio, followed by three or four notes, with slight variation depending on the model of the Macintosh. The PowerBook , , and used the second half of the 8-note arpeggio as found on the Quadra and Centris models, or the entire death chime if the error occurred before the screen lights up. The Power Macintosh and Performa and series, along with the Power Macintosh upgrade card, used an eerily dramatic 3-note brass fanfare with a rhythm of drums and cymbals.

Since the introduction of the iMac in , the Chimes of Death are no longer used and were replaced with a series of tones to indicate hardware errors. From Wikipedia, the free encyclopedia. This article needs additional citations for verification. A short sound effect is better; something under 6 seconds is a good target.

You can perform a test to make sure your Automator application will work before you save it as an application. To test a script, click the Run button in the top right corner of the Automator window. One of the most common problems is an incorrect file path name.

Macintosh startup

If you're having difficulty with the path name, try this little trick. Delete the current path to your sound effect file. Launch Terminal , and drag the sound file from a Finder window into the Terminal window. The file's path name will display in the Terminal window.

Problems with the say command are usually caused by not using quotes, so make sure to surround any text you want your Mac to speak by double quotes. When you've verified that your script is working properly, select "Save" from the File menu.


  1. 2010 mac pro ram upgrade;
  2. how to turn off icloud on mac air!
  3. cisco show connected device mac.
  4. cannot connect to app store mac os.
  5. Using Automator and Terminal to Get Your Mac to Play Startup Sounds.
  6. Learn more;

Give the file a name, and save it to your Mac. Make a note of where you saved the file because you'll need that information in the next step. The last step is to add the application you created in Automator to your Mac user account as a startup item. Share Pin Email. Tom Nelson has written hundreds of articles, tutorials, and reviews for Other World Computing and About.

He is the president of Coyote Moon, Inc. Updated February 14, So, let's get going with our project to add a startup sound to your Mac.


  • blockiertes plug in mac safari!
  • How to Temporarily Disable the Startup Sound!
  • How to Add Startup Sounds to Your Mac.
  • How to Add a Startup Sound to Mac OS X - iClarified.
  • Navigation menu.
  • About Mac startup tones;
  • .
  • Select Application as the template type to use, and click the Choose button. Near the top left corner of the window, make sure Actions is highlighted. From the Actions Library, select Utilities. Click and drag "Run Shell Script" to the workflow pane. The script we'll add is pretty basic; it's in the following form: Say -v VoiceName "Text you want the say command to speak". To create our example, enter the following into the Run Shell Script box: Say -v fred "Hi, welcome back, I've missed you".